The duration spent on drilling is an essential element to be taken into account when exploring any hydrocarbon field as it is a direct reflection of the money spent. This article looks into Non-Performing Time events by discussing it from the sub-surface and surface scenarios, based on the analysis performed in 5 wells of the Volve Oilfield. ...
recorded for a well primarily depends on the purpose of the drilling activity. This article categorizes the log suits based on Exploratory drilling and Development drilling.
Petrophysical properties are important to understand the nature of the CO2 storage reservoir and to understand the mechanisms at play. Petrophysical properties like porosity and permeability are key parameters for a safe long-term storage of CO2 but also for the injection operation itself. The vertical and horizontal distribution of these properties helps
The Sleipner Gas field is composed of the Sleipner Vest gas field and the Sleipner Øst condensate gas field. One challenge with production was the high CO2 content (approximately 9 %) in these Gas fields.
he Volve field is a 4-way dip closure with the Middle Jurassic Hugin Formation as reservoir. The geologic cross section is an important toot to understand the development of the producing Hugin formation across the Volve Oilfield.
The Volve oilfield has three types of Well completions designed with offshore completions: Oil production Wells, Water injection Wells and Water production Wells. The Wells are deviated and drilled from a single offshore
The Volve Oilfield Simulation model was build on a grid of 108x100x62 cells. The total number of cells in the model is 680400 and the number of active cells is 183,545.
PVT analysis of the Volve Oil field consists for four reports covering three wells. These reports cover Constant Mass Expansion, Differential Liberation, Separator tests and Compositions analysis. However, it is seen that none of the reports are complete in themselves
The Volve field simulation directory has simulator input files that are used to initiate reservoir simulation. The Data file is made up of eight section that describe the reservoir and fluid characteristics. ...
The Volve oilfield is located in the 15/9 Block that was awarded to Equinor in 1976. The Oilfield was developed with 24 wells. The production strategy of this field is explained in
